Tue. Sep 29th, 2020
residential pressure washing spring

Everything You Need to Know About Pressure Washing

When it comes to washing outdoor structures, specifically the ones that are hard to reach,

When it comes to washing outdoor structures, specifically the ones that are hard to reach, you must have tried a few things, such as water, soap, scrubbing, and so on. Moreover, you must have attempted some commercial items that don’t do what they say.

After all those steps, you must be wondering what to do when it all fails? It’s time to make use of a pressure washer. Numerous individuals currently routinely utilize this means of washing, termed as “power washers” to clean things with water jets pressurized at around 100–200 times the pressure of the air around us.

What Size of Pressure Washer Should You Pick?

William Alexander, executive vice president of sales and marketing at Simpson Pressure Washer, explained,

“Choosing the correct machine is truly straightforward. In the first place, settle on the sort of work you will do; at that point, select the correct machine from one of three sorts. They’ll deal with generally residential, light-commercial, and sometimes proficient cleaning tasks. Keeping your cleaning objective in mind will help you settle on your purchase and furnish you with the best pressure washer for the job.”

Electric: 1300 to 1900 psi

Useful for The Following:

  • Small Decks and Patios
  • Outdoor Furniture
  • Plastic Play Sets
  • Car Washing
  • Grills

Gas engine: 2000 to 3100 psi (2 to 2.5 gallons per minute)

Useful for The Following:

  • Homes and shops
  • Vehicles
  • Fences
  • Decks
  • Patios
  • siding
  • Boats

Gas engine: 3200 to 4200 psi (2.8 to 4 gallons per minute)

Useful for The Following:

  • Paint Stripping and Surface Preparation
  • Construction-Site Cleaning
  • Fleet Maintenance
  • Professional Tasks
  • Graffiti Removal

Some Useful Tips and Strategies About Pressure Washing

When you have the essential operation down, you’ll quickly figure out how to get the most productive clean with any surface. There are different tips and techniques that will help you with advancing.

Set A Timetable

In order to limit wasted water, fuel, and detergent, it is better to set a timetable. There are diverse schedules for different surfaces contingent upon its material and exposure to the components, in addition to other things.

  • Every three years intended for Stone or brick patios/walkways
  • Once a year intended for Concrete driveways
  • Once a year intended for Wooden decks
  • Every two years intended for Vinyl siding

Pressure Washing Techniques for Vinyl Siding

The recommended way is to make use of a low-pressure setting on an adaptable wand or a soap nozzle in case of applying detergent.

  • Allow the detergent to remain on the surface for a couple of minutes; however, don’t allow it to dry. Re-wet as per the requirement and attempt to wash each side of the house.
  • Then wash starting from the top, holding the wand around 10 inches away, and spray at a descending point.
  • For difficult places, get somewhat nearer, yet be cautious, or you could strip paint or cause other harm.
  • Stay away from electrical outlets, light installations, windows, doors, and the holes around them.
  • Holding around 18 inches from the siding, wash the siding straight on from the base up.
  • Separate the supply of detergent. Connect a nozzle that has higher pressure.
  • It is not recommended to apply detergent from the base up.
  • Work in little areas.

Pressure Washing Techniques for Wood Decks

  • Put on the detergent in areas, beginning near you and moving outward. Grasp the wand at a 45-degree point and 1 – 2 feet from the surface.
  • To clean, utilize a nozzle that has high pressure. Move with the wood grain to more readily evacuate dirt and detergent.
  • Leave the wood to dry for 48 hours Prior to staining or sealing.
  • Stay away cleaning under direct sunlight.
  • Make use of overlapping passes.

 

 

Pressure Washing Techniques for Washing Vehicles

In this case, the recommended way is to begin with plain water and a low-pressure nozzle with the goal of getting rid of the loose debris. Stay away from around windows, mirrors, and other fragile surfaces.

  • You need to make sure that you don’t wash on grass or gravel, so you don’t kick up debris and onto the vehicle with the shower.
  • After that, change to a soap nozzle and spray on the cleanser, working from the base up with wide covering strokes.
  • Scrub off stuck-on dirt with a scour brush. On the other hand, you can utilize a scrub brush added on your wand.
  • You need to make sure that you don’t utilize high-pressure tips or move excessively close, or you’ll harm the paint.
  • You need to make sure that you don’t shower inside the engine bay.
  • Rinse starting from the top with a 25-degree spout.

Author’s Bio:

Bardon Calvin has been involved in the pressure washing sector for a considerable length of time, and particularly he has spent a large part of his career in residential pressure washing spring. He has a habit of helping people by sharing useful tips on pressure washing topics.

Leave a Reply

Your email address will not be published. Required fields are marked *